Deformation detection
Place the egg tray on the fixture, put 30 egg models, and measure the deformation range of the egg tray.
Dimensional and weight inspection
Weigh the weight of 3 products with a percentage of the weight of the average. Measure the upper, middle and lower three dimensions in each direction with a vernier caliper, and obtain the average value.
Beating degree inspection
Use a beating degree meter to measure 2g of absolute dry pulp diluted to 1000ml, and the amount of water spilled out is the beating degree.
Moisture content detection
Put the product in the oven, and the weight lost after drying is the moisture of the product.
Ash detection
After burning the sample in a high-temperature muffle furnace, weigh the weight of the remaining residue as the ash weight of the product.
Slurry concentration detection
Take 100g of slurry, and after drying, its absolute dry weight is the concentration of slurry.
Water resistance test
Pour 1/2-2/3 of the normal temperature water into the non-adjacent egg nest, and count the time required for the water to penetrate the egg nest.
Pressure resistance test
Test the pressure of three products with a tensile tester, and obtain the average value.
Operation Specification
Operate the experimental equipment according to the chapter, and pay attention to personal safety at all times.
production technology
The production line adopts Danish Hartmann production technology, and the complete set of production equipment is imported. From the preparation of slurry to the molding, drying and packaging of products, all realize automatic control. The production process is mature, the efficiency is high, the energy consumption is low, the product quality is stable, the production capacity is high, the inventory is sufficient, and the supply is timely.
Main production equipment
This production line also adopts many upgraded equipment, such as high consistency pulper, mold cleaning device, tray cleaning device, chain automatic lubricating device, molding machine heating hood, etc., which improve the operation performance of the equipment, save energy, reduce production cost and reduce waste. The most famous one is the heating hood of molding machine, which increases the output of the production line by 10%, saves energy by up to 9%, and increases the dryness of wet products by 2%, provide better product quality and lower waste.
No.5 Huihang Road, Economic Development Zone, Nanqiao District, Chuzhou City, Anhui Province
VR QR Code